Supported devices and data routes
Choose the whole route: device → source app/cloud → uploader → Nightscout. A supported family does not mean every regional sensor, account or data type is supported. These are documented support scopes, not claims that every combination was tested on a customer device.
Cloud sources in Pro Connect
| Route | Available data and usual timing | Limits |
|---|---|---|
| Dexcom Share | Glucose, usually 5–10 minutes | No pump treatments or profiles. G5/G6/G7 Share route; confirm Share availability for ONE/ONE+/Stelo and country. |
| LibreLinkUp | Libre 2/3/3+ glucose, usually 5–10 minutes | No insulin/carbohydrate or profile promise. Libre 1 and scanning-only paths need a separate check. |
| CareLink | Available glucose, pump events and status, usually 5–20 minutes | Exact pump/sensor/live-account combination matters; no profile promise. |
| Tandem Source | Glucose usually 5–10 minutes; available treatments can take up to an hour | IOB can be intermittent. No reservoir-remaining display. Profiles only when source settings are available. |
| Omnipod 5 / Glooko | Available glucose and treatments; delay can be up to an hour | Not a real-time stream. No profile import promise; other devices through Glooko need confirmation. |
| Twiist / Insiight | Glucose and available status/IOB/COB, usually 5–10 minutes | Native notes are not a complete treatment stream; optional Tidepool enrichment is separate. |
| Tidepool | Available glucose, typed treatments and pump settings | The device must actually upload the required records to that account. |
| Eversense NOW | Glucose from a follower account, checked about every five minutes | The wearer’s transmitter and cloud sync must be current; account region and sensor compatibility matter. No treatment or profile import. |
| MyLife / CamAPS | Testing cloud connection | Check real source data and coverage; not a blanket CamAPS promise. |
| Medtrum EasyView | Linked EasyFollow follower account | Glucose route; treatment/profile coverage is not established here. |
Timing is approximate and depends on upstream delivery. Site availability is not proof of fresh data.
Phone uploaders
Loop, Trio, iAPS, AAPS, xDrip+ and xDrip4iOS can send data already present in a correctly configured app. The app’s own sensor, phone and version requirements still apply. Juggluco is an Android app; it is not an iPhone option.
For Libre 1/2 through Loop or iAPS, first establish the supported sensor/bridge/app combination using that app’s documentation. A Nightscout upload guide cannot make an unsupported sensor connection work.
Follower apps and platforms
Once Nightscout is receiving current data, a follower app can display it. Sugarmate by Tandem is available on Android and iOS, with a web version also available. See Tandem’s official getting-started page for downloads and the Sugarmate connection guide for Nightscout setup. Device, country and data-source requirements depend on the installed app version.
See Choose a follower app for other documented options.
Routes that need an explicit check
See other devices and unlisted sources for InPen, LinX, Ottai and SmartGuide. Native support and a third-party uploader are different questions. Do not purchase equipment based only on a manufacturer name appearing in a list.